PRINTED PPGI
PRINTED PPGI PPGI Coil
PPGI (Prepainted galvanized steel)is coated with organic layer, which provides higher anti-corrosion property and a longer lifespan than galvanized steel sheets.The base metal for PPGI consist of cold-rolled steel, Hot dip galvanized steel, electro-galvanized steel and hot dip galvalume steel .The coating material is as following: Polyester, Silicon modified polyester, Polyvinylidene fluoride, high-durability polyester ,etc.
Production process : one coating one baking, double coating one baking, double coating double baking, three coating three baking ,etc.
According to surface treatment, PPGI/PPGL contains : Regular .Embossed and Printed.
PPGI main function: Architectural construction, Electrical household appliances, Transportation , Etc.
PRINTED PPGI PPGI Coil Features
Printed PPGI are mainly used to produce steel wooden doors, security doors, anti-fire doors, coach, garage, carport and roll-up doors as the highly processing wooden color sheet. And also be used in household electrical appliances, anti-scratch door sheet, telephone booth, newsstand and division plate as the common patterned sheet.On generally, they are used to produce steel-plastic sheet, honeycomb plate, ceiling board and sandwich panel in decoration of wall and substructure work.
ADVANTAGES:
1.Resistance to deep drawing, zero spangle, the galvanized steel coated equally distributed, and the painting layer adhesive property is good.
2.The products can be bent to 180°C .without crack, chipping and paint-shedding.
3.Anti-corrosion, anti-rust, aging resistance, solvent resistance and wiping 200 times without paint-shedding.
4.Durable and long lasting, they are no color fading and charring when burned on the fire with gasoline on the plate.
5.High stamping and figurability
6.PPGI have the full specifications, the thickness range from 0.15-1.0mm are all provided as choice with the width of 1250mm or below.
PRINTED PPGI PPGI Coil Equivalent Material
| Grade | Euronorm | China GB | Japanese JIS | America ASTM | |
| No. | |||||
| DX51D+Z | DX51D+Z | DX51D+Z | SGCC | CS Type C | |
| DX52D+Z | DX52D+Z | DX52D+Z | SGCD1 | CS Type A CS Type B |
|
| DX53D+Z | DX53D+Z | DX53D+Z | SGCD2 | CS Type A CS Type B |
|
PRINTED PPGI PPGI Coil Standard Specification
| Width | 600mm-1500mm | ||||||
| Length | Since the custom | ||||||
| Surface | Polyester coating (PE) color coating | ||||||
| Finish | No flowers and flowers | ||||||
| Form | Coils, Foils, Rolls, Plain coil, Shim coil, Perforated coil, Chequered coil, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
||||||
PRINTED PPGI PPGI Coil Production process
PRINTED PPGI PPGI Coil Metal Content
| Grade | C | Mn | Si | P | S | |
| DX51D+Z | Min. Max. |
0.12 | 0.6 | 0.5 | 0.1 | 0.045 |
| DX52D+Z | Min. Max. |
0.12 | 0.6 | 0.5 | 0.1 | 0.045 |
| DX53D+Z | Min. Max. |
0.12 | 0.6 | 0.5 | 0.1 | 0.045 |
| CS A | Min. Max. |
0.1 | 0.6 | 0.03 | 0.035 | |
| CS B | Min. Max. |
0.02-0.15 | 0.6 | 0.03 | 0.035 | |
| CS C | Min. Max. |
0.08 | 0.6 | 0.1 | 0.035 | |
- Tensile strength :270-500MPa
- Yield strength :MPa
- Elongation :≧22%
PRINTED PPGI PPGI Coil Processing technology
Cold-rolled steel plate and galvanized steel plate as the base material, after surface pretreatment (degreasing, cleaning and chemical conversion treatment), continuous method (roller coating method) coating, baking and cooling products. The main production process of the ordinary two-coating and two-drying continuous color coating unit is as follows: pre-treatment of uncoiling---coating---drying---post-treatment---coilingPRINTED PPGI PPGI Coil Features
| PPGI coil Price List | PPGI coil FOB Shanghai Per Ton (USD) | |||||||
| PPGI coil | $450.00-$900.00 | |||||||
